Tag: host tool

Connects a modern Mac to Apple and PC floppy drives for disk imaging, flux capture, analysis, and writing.

The official store marked Applesauce+ sold out on 2026-07-15. The client requires macOS 10.13 or later; Windows and Linux use requires macOS virtualization. Current boards use a 12V adapter, and the power adapter and PC-drive cables are sold separately. Flux imaging with Apple-compatible 5.25-inch drives requires a sync sensor, which is also strongly recommended for Apple 3.5-inch drives; PC drives do not need one.

A DIY USB floppy interface and cross-platform toolkit for reading and writing unusual disk formats with a conventional PC floppy drive.

Building the original interface requires a compatible PSoC 5 development board, a floppy connector, soldering, a conventional PC floppy drive, cabling, and drive power. The project warns that not every listed format has been tested on physical disks; its dinosaur markers identify encoders or decoders based only on captured data. Copy-protection schemes are not a core focus.

Connects a modern computer over USB to a separate floppy drive for reading, analyzing, and writing disks at the raw flux level.

An assembled board still needs a compatible Shugart-interface floppy drive, ribbon cable, USB cable, and suitable drive power. Older 5.25-inch and 3-inch drives often need 12V or a separate supply. Remove the write-enable jumper while preserving originals. Apple II, Macintosh, and Commodore 64 GCR disks can require trial and error with drive choice.

Turns supported classic-computer keyboards, digital joysticks, and analog paddles into USB HID input devices for a modern PC, Mac, or Raspberry Pi.

The maker's store listed Keyrah V3 for immediate delivery on 2026-07-15. The box includes the circuit board and printed manual but no USB cable. Individual Computers has stopped ordinary shipments to the United States; its stated exception requires a forwarding service and wire-transfer payment, so US buyers should also check the official reseller list.

A USB floppy controller and host-software package for forensic-quality flux capture, analysis, image conversion, and disk writing.

The official site offers hardware to private and hobby users through its web store. Host software is free only for private, personal use; commercial and institutional users, including libraries, archives, and museums, need a separate license. The current macOS GUI requires Rosetta 2. Consult the current manual before selecting and powering a drive.

Connects a modern computer or serial controller to a 34-pin floppy drive for low-level flux capture, analysis, and disk duplication.

Human review confirmed that SuperCard Pro was not currently available on 2026-07-15; the official page says "Advanced Version Coming Soon!" Check the direct page for a future release. SuperCard Pro requires a PC-compatible 3.5-inch or 5.25-inch drive, a 34-pin cable, and suitable drive power; Amiga 3.5-inch drives are explicitly incompatible. Floppy-emulator firmware described as planned is not treated as a current feature.