Tag: esxdos
3 matching upgrades
Showing 3 products.
| Status | Product | What it does | Compatibility | Links |
|---|---|---|---|---|
| AvailableChecked Jul 27, 2026 | BISON FPGA DivMMC TurboSound 2xAYby Lotharek | Combines DivMMC-compatible microSD storage, 512 KB of expansion RAM, dual-AY audio, DAC modes, and configurable joystick or mouse input on the ZX expansion bus. The seller exposed a login-or-register-to-buy path on 2026-07-27 and documented firmware 1.5. Power off before changing the edge connection or input mode. Automatic Sinclair-versus-Amstrad selection depends on 9 V at edge pin 3B; compatible clones without that signal need the documented modification. Firmware updates require a separate Gowin programmer and removal of the flash ROM. Prepare a separate FAT32 microSD card with the supported ESXDOS release. |
| Buy BISON FPGADivTIESUS open project |
| DiscontinuedChecked Jul 27, 2026 | DivIDE Revisedby Lotharek / Velesoft | Adds CompactFlash storage, selectable disk firmware, an LCD, and a five-mode joystick interface to original ZX Spectrum computers. Lotharek marks this revision discontinued. The seller says its joystick functions were tested on original Sinclair and Amstrad ZX Spectrum computers and does not guarantee clones. Media needs one active FAT16 partition, and compatibility still depends on selected firmware and correctly prepared software images. Identify the installed firmware and switch settings before using a second-hand unit. Sources |
| Lotharek DivIDE Revised archive pageSearch eBay for DivIDE Revised |
| AvailableChecked Jul 27, 2026 | DivIDE_AYby Lotharek | Combines CompactFlash storage, four selectable firmware slots, AY sound, stereo output, and two joystick ports on a ZX Spectrum expansion interface. The seller exposed a login-or-register-to-buy path on 2026-07-27. Use a CompactFlash card with one active FAT16 partition and remove it only while power is off. The page distinguishes Sinclair and Amstrad bus modes, says the grey +2 is not an Amstrad-mode machine, and explicitly names +2B and +3 for Amstrad mode. It does not clearly establish +2A support, so that model is not attached. Sources |
| Buy DivIDE_AY |